Stampante 3D a resina Mars 4 DLP con proiezione TI DLP e vetro temperato

Stampante 3D a resina Mars 4 DLP con proiezione TI DLP e vetro temperato

Name: Stampante 3D a resina Mars 4 DLP con proiezione TI DLP e vetro temperato
Brand: 3D Printers, Resin & Filaments | ELEGOO Official
SKU: SPUK-EL-3D-M4D
Price: 194.99 USD
Availability: InStock

$194,99

$299,99

35% OFF

Spedizione gratuita

Offerta a tempo limitato

{{ lto.h }}:{{ lto.m }}:{{ lto.s }}

Inventario:

Esaminare i dettagli

SKU:SPUK-EL-3D-M4D

modello:

peso: 0 kg

{{ variable.name }} : {{ variable.values[selectedVariantsIndex[variable_index]].name }}

quantità:

Pagamento sicuro

Resi facili

Consegna rapida

Garanzia di qualità

Dettagli prodotto

DLP build, right out of the box: The ELEGOO MARS 4 DLP prints with Texas Instruments DLP technology, firing the 405 nm beam straight onto the bottom of the resin tank at up to 95% light uniformity. Tempered glass stands in for the usual LCD panel and passes up to 95% of that light, so diffusion and stray light drop off. Full-gray antialiasing then softens the jagged edges, which shows on the finished surface.
2W+ hours of projector life: That projector is rated for 20,000+ hours. Set it beside the 2,000 hours an LCD screen gives you and the gap is 10x, so screen replacement and its maintenance costs mostly disappear.
Low draw, near-silent running: Operating power sits at 12W, about 1/7 of what an LCD printer pulls. Less power means less heat, so there's no cooling fan at all, and print noise stays below 48 dB.
A stiffer Z axis: The linear rail goes from 15 mm to 20 mm, which cuts the vibration amplitude during Z-axis movement and tones down layer patterning on the model. A sandblasted build plate grips well and helps prints finish rather than slip.
Slicing in Voxeldance Tango: Choose static mode, or dynamic mode with its smooth and high-speed settings. In dynamic mode the software adjusts print speed to each layer's cross-sectional size, easing release force and pushing printing efficiency up. ELEGOO also opened a new GOO slicing format, readable by multiple slicers without restriction.
Cleaner air around the machine: A USB-powered air purifier with activated carbon inside absorbs and filters resin odor. There's also ELEGOO's first large air purifier for photocuring (247*210*410 mm), designed to remove formaldehyde and up to 80% of VOC.

menù

Ricerca di successo

Prodotti caldi

Stampante 3D a resina Mars 4 DLP con proiezione TI DLP e vetro temperato